ModalAI Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Register
    • Login

    ESC (PWM) calibration for flight core v2

    Flight Core v2
    3
    3
    182
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • A
      Anubhav
      last edited by

      Hi Team,
      @modaltb
      I have been trying to calibrate the esc connected to my flight core v2. the esc pwm cable is connected to J7 port of FC. as given in docs for FC v2 "Standard PX4 drivers used" I assumed calibration should happen through QGC. Also I have tried the ESC calibration method mentioned here. but I was unable to do the calibration through both attempts.
      The below output of calibration performed as given in the FC v1 ESC calibration.

      Using portname /dev/serial/by-id/usb-ModalAI_PX4_FMU_ModalAI_FCv2_0-if00
connecting...
Error: Unable to open port

      Help from your side will be highly valuable.

      Thanks!
      Anubhav

      modaltbM 1 Reply Last reply Reply Quote 0
      • modaltbM
        modaltb Dev Team @Anubhav
        last edited by

        @Anubhav I believe use QGC should work, I would not try to use the method for FCv1 (since we couldn't power over USB, you weren't able to use the standard method in QGC).

        If you are powered off USB on FCv2 and use the QGC method, what issue are you having?

        wilkinsafW 1 Reply Last reply Reply Quote 0
        • wilkinsafW
          wilkinsaf Dev Team @modaltb
          last edited by

          @modaltb I seem to be having the same issue of the flight core power cycling when battery is plugged in. therefore, esc calibration fails

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Powered by NodeBB | Contributors