Voxl flight - cannot run voxl-configure-mpa after flashing new system image 0.9.5, 0.9.0, etc.
-
Hi,
When i try to run voxl-configure-mpa --factory-reset after flashing a new image onto the VOXL flight board, I get the error: "Cannot run factory reset without saved factory mode!". Obviously, this implies some config file is missing, but I've never had this problem before, especially after a fresh system image flash. So far I have tried 0.9.5, 0.9, and 3.8.0, all with the same result. Additionally, no services can be started (voxl-configure-vision-px4 configures the service but does not actually start it, and systemctl start voxl-vision-px4 does nothing). The reason I'm using a VOXL flight board instead of the VOXL + flight core v2 combo is because the flight core v2 on this drone got fried somehow, and also the v2 doesn't support 1.12.3 firmware, and 1.13 firmware seems to be incompatible with several devices (lightware lidar, pixycam).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login