Image Sensor 4k High-resolution Dies Sliently on VOXL2
-
Has anyone encountered the same issue that 4k High-resolution Image Sensor running on VOXL2 stops publishing frames after a minute or so? The issue is exacerbated under temperatures exceeding 90 F. The issue can be mitigated under lower fps. Seems like a heat and/memory leak issue. Any advice would be greatly appreciated.
Camera: https://www.modalai.com/products/mdk-m0061-1?variant=45119396413744
VOXL2: https://www.modalai.com/products/voxl-2?variant=39914779836467 -
The kernel will start shutting off processes at 90 F
What version of software are you using, and how are you streaming the images? If you use SDK 1.0 and the h265 interface, 4k should be minimal thermal impact
-
@Chad-Sweet @Wei-Cui-0
Did you mean to write 90-C Chad in your response? -
@Wei-Cui-0 I am facing similar issue with tracking camera where my CPU temperature was raising above 95 degrees and voxl-camera-server is shutting down which leads to crash while operating flight in VIO mode.
@Chad-Sweet Can you please confirm this?
Link to my ticket : https://forum.modalai.com/topic/2401/voxl-camera-server-crashes-and-qvio-says-cam_missing_stalled -
@Chad-Sweet Thanks Chad. We have SDK 0.8 onboard. We are not streaming videos. The issue occurs more frequently in the field, where the temperature exceeds 90 F in the summer.
