Hello! I would like to configure the VOXL 2 to assign a specific static IP to an Ethernet adapter I have connected via a M0078 add-on board and the 0041 4-pin to USBA cable. I would think that putting the configuration in /etc/network/interfaces should work, but that seems to have no effect. Any help or suggestions would be appreciated!

ModalAI Forum

Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you have been placed in read-only mode.

Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).

Static IP for Ethernet Adapter

Unsolved General Questions

1 Posts 1 Posters 323 Views

L Offline
L Offline
liam

wrote on last edited by

#1

Hello!

I would like to configure the VOXL 2 to assign a specific static IP to an Ethernet adapter I have connected via a M0078 add-on board and the 0041 4-pin to USBA cable. I would think that putting the configuration in /etc/network/interfaces should work, but that seems to have no effect.

Any help or suggestions would be appreciated!
1 Reply Last reply

0

Reading along? Create a free ModalAI Forum account to join in.

With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.

Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.