voxl-replay repeatability
-
Hi,
By replaying the voxl-logger log, I am trying to recreate QVIO behavior. However, the QVIO output appears to differ from the original log. Additionally, replaying the same log several times does not result in the same QVIO output (see attached plot). I guess this is due to the different initial state of the QVIO at every replay (before the voxl-replay begins). Would it be possible to force QVIO to perform independently at each log replay, and more importantly, to perform identically to the original log?I am using voxl2
in order to obtain logs and replay them I am using the following comands:
for logging:
voxl-logger -o -t 30 --note log_for_replay_test
for replay:
I am modifing info.json to include only two channels (IMU and tracking)
voxl-logger -o -t 35
voxl-replay -n 0 -y
-
hmmm. I assume you have disabled voxl-camera-server and voxl-imu-server when replaying the data so there is no conflict?
Do you mind providing the log so I can try replaying the same data?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login