HDMI-CSI bridge driver on VOXL2

DanielHviid · 28 Oct 2022, 07:51

Hi,

I'm looking at using the VOXL2 as a flight controller for a fixed wing UAS using a gimbal camera with an HDMI output. I see that the HDMI input accessory for the VOXL was discontinued, is there any HDMI-CSI bridge drivers available for the VOXL2, or are there any plans for developing any such drivers?

Chad Sweet · 2 Feb 2023, 02:51

We have had much better success using HDMI to USB 3 adapters and voxl-uvc-server, so we are focused on that for HDMI support for the time being. It is smaller, cheaper and more robust.

황인호 · 2 Feb 2023, 02:51

@Chad-Sweet

Where can I connect 'HDMI to USB 3 adapter' to VOXL2 board?

Chad Sweet · 2 Feb 2023, 03:06

This exposes a USB 3 host which is a good way to connect https://docs.modalai.com/voxl2-usb3-uart-add-on/

황인호 · 2 Feb 2023, 04:48

@Chad-Sweet

Thank you for reply.
But, If I use this USB 3 adapter, 5G modem board is not useable. Right?

황인호 · 2 Feb 2023, 05:23

@Chad-Sweet

I found this. The 5G modem board also has a USB 3 port.

Then, all I need is this cable.
https://www.modalai.com/collections/cables-1/products/mcbl-00022