VOXL2 QVIO recover during flight after failure
-
Dear ModalAI team,
I too am interested in understanding this better.
I understand that when using QVIO as the only source of localisation data, re-initialisation mid-air to base-coordinates would be quite dangerous, and hence not at all recommended.
But, in scenarios when the MAV is using QVIO data in conjunction with other localisation/odometry sources like GPS or HereFlow, Is there currently any way to configure the QVIO server to (re-)initialise itself based on the current EKF pose from PX4?
-
Druing position mode once the VIO fails it does not recover during flight even if features are there. Is there any way to recover it during the flight itself?
A small observation from my side. While we are flying the quad indoors with compass disabled and using a external optical sensors (in both cases) the qvio recovers itself even after force restarting it using terminal, but the same does not recovers itself outside. For both the cases the exposure and gain of tracking cam was in auto. Can you tell us what might be the issue
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login