EM9291 on Starling 2 / VOXL 2 Only Connecting on LTE — No 5G NR Bands Detected (Firmware Issue?)
-
Hi ModalAI team,
I’m using a Starling 2 max with the 5G modem add-on (Sierra Wireless EM9291). I’ve now fully activated a US Mobile Dark Star (AT&T) 5G plan, and the modem successfully registers on the network. However, the modem only connects over LTE and does not show any support for 5G NR bands.
Here is the current status:
- SIM + Network Registration Working
The SIM is active, and the module now registers correctly:
Registration state: 'registered'
CS: 'attached'
PS: 'attached'
Radio interfaces: 'lte'
PLMN: 310/410 (AT&T Dark Star)- No 5G NR Detection Anywhere
All QMI queries indicate LTE-only operation:
--nas-get-serving-system → only “lte”
--nas-get-rf-band-info → EUTRAN band only
--nas-get-system-selection-preference shows:
Mode preference: cdma-1x, gsm, umts, lte, td-scdma
(There is no nr5g entry at all.)
Attempting to enable NR returns errors:
error: invalid rat mode pref value given: 'mode-preference=nr5g'
This only occurs when the modem firmware does not support NR.
- Firmware Appears to Be LTE-Only
Firmware reported by the module:
Modem/PRI Build ID: 02.13.08.00_GENERIC
Based on Sierra Wireless documentation, NR-capable EM9191/EM9291 firmware versions are typically in the 03.xx.xx.xx or 04.xx.xx.xx series.
The build I have (02.13.08.00_GENERIC) appears to be a pre-NR (LTE-only) firmware image.This seems to explain:
No NR bands
No NR technology preferences
Failure to set NR mode
LTE-only operation despite 5G plan
- Question
Does the Starling 2 / VOXL 2 modem carrier ship with an LTE-only EM9191 firmware by default?
If so:
Can ModalAI provide a 5G NR-capable EM9191/EM9291 firmware package (CWE/NVU)?
Or instructions for safely updating the modem firmware on VOXL 2?
My goal is to enable 5G NR (NSA/SA) operation so the drone can use the full Dark Star 5G plan.
Thanks,
Seungjae Baek - SIM + Network Registration Working
-
Hi ModalAI team,
I’m using a Starling 2 max with the 5G modem add-on (Sierra Wireless EM9291). I’ve now fully activated a US Mobile Dark Star (AT&T) 5G plan, and the modem successfully registers on the network. However, the modem only connects over LTE and does not show any support for 5G NR bands.
Here is the current status:
- SIM + Network Registration Working
The SIM is active, and the module now registers correctly:
Registration state: 'registered'
CS: 'attached'
PS: 'attached'
Radio interfaces: 'lte'
PLMN: 310/410 (AT&T Dark Star)- No 5G NR Detection Anywhere
All QMI queries indicate LTE-only operation:
--nas-get-serving-system → only “lte”
--nas-get-rf-band-info → EUTRAN band only
--nas-get-system-selection-preference shows:
Mode preference: cdma-1x, gsm, umts, lte, td-scdma
(There is no nr5g entry at all.)
Attempting to enable NR returns errors:
error: invalid rat mode pref value given: 'mode-preference=nr5g'
This only occurs when the modem firmware does not support NR.
- Firmware Appears to Be LTE-Only
Firmware reported by the module:
Modem/PRI Build ID: 02.13.08.00_GENERIC
Based on Sierra Wireless documentation, NR-capable EM9191/EM9291 firmware versions are typically in the 03.xx.xx.xx or 04.xx.xx.xx series.
The build I have (02.13.08.00_GENERIC) appears to be a pre-NR (LTE-only) firmware image.This seems to explain:
No NR bands
No NR technology preferences
Failure to set NR mode
LTE-only operation despite 5G plan
- Question
Does the Starling 2 / VOXL 2 modem carrier ship with an LTE-only EM9191 firmware by default?
If so:
Can ModalAI provide a 5G NR-capable EM9191/EM9291 firmware package (CWE/NVU)?
Or instructions for safely updating the modem firmware on VOXL 2?
My goal is to enable 5G NR (NSA/SA) operation so the drone can use the full Dark Star 5G plan.
Thanks,
Seungjae Baek@Seungjae-Baek

One more question: Should we use 5G antenna, not LTE? As I know when we buy the 5g modem the default antenna is the one with LTE. - SIM + Network Registration Working
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login