VOXL 2 will camera server will not run with cam config 3 (although induvial sensor configs work)
-
Hello, everyone; I am at a standstill. I have had the VOXL2 camera server up and running with all 6 image sensors in the C11 dev kit working, but not coming back to it; the C11 config will not boot up with the cam server running. I have tried to config each sensor individually, (hires) (tracking)(stereo), and they all work individually and are viewable on the VOXL portal. I have narrowed the problem down to an individual stereo image sensor being faulty, but I have two sets. When using the working set, I am unable to compile even the #3 config with only enabling the front stereo, tracking, and hi-res sensors. I have attached two screenshots showing the error message for trying to compile camera config #3, which gives an error. but when I try to compile camera config #11 it compiles without error even though a rea stereo camera pair (dual) is not connected. When rebooting the VOXL camera server is not running on the #11 kit because the rear stereo is not connected, but if I could set the config to the #3 kit it should work but it is giving me an error when choosing it. Any help or suggestions would be appreciated.
-
"SOLVED"
Hi everyone, the problem was due to our own error of not updating to the most current SDK. after the update everything was fixed, although there was still a faulty stereo sensor that will not function.
