VOXL MPA_to_ROS rostopics not subscribing to anything

[Moderator]

@Darshit-Desai that service is setup so that it does not publish anything without a subscriber. maybe try to record a rosbag to see if you're getting data?

[ben grocholsky]

rostopic hz /tracking should subscribe to the topic and work as you expected.
e.g. for me:

I've seen two things that might be happening:

1. The voxl-camera-service has stopped running. Check with voxl-inspect-services , voxl-inspect-qvio, systemctl status voxl-camera-service.

2. Your environment variables might not be set right for ROS1 remote message transport. Setting ROS_MASTER_URI on your laptop to point to the master running on the voxl is enough to discover ROS1 topic names. Two more variables are needed to be set to get message transport working ROS_IP and ROS_HOSTNAME

Here's an example that works for me. Adjust it to match the IP addresses for your voxl2, laptop, and the ROS1 version you're running on your laptop. Select the image you want to view in the rqt_image_view GUI.

Script on voxl2: start_mpa_to_ros1.sh

#!/bin/bash
source /opt/ros/melodic/setup.bash

voxlIP=`hostname -I | awk '{print $1}'`
echo "VOXL IP is: " $voxlIP
export ROS_IP=$voxlIP
echo "ROS_IP is: " $ROS_IP
export ROS_HOSTNAME=$voxlIP
echo "ROS_HOSTNAME is: " $ROS_HOSTNAME
echo "ROS_MASTER_URI is: " $ROS_MASTER_URI

roslaunch voxl_mpa_to_ros voxl_mpa_to_ros.launch

Script on laptop: start_rqt_imageview.sh

#!/bin/bash
# change these to match the computer connecting to VOXL ROS1
MasterIP=192.168.1.100
MyIP=192.168.1.101
ROS_DIST=noetic

# set environment variables and start rqt_image_view
source /opt/ros/$ROS_DIST/setup.bash

export ROS_IP=$MyIP
export ROS_HOSTNAME=$MyIP
export ROS_MASTER_URI=http://$MasterIP:11311

rosrun rqt_image_view rqt_image_view

[Darshit Desai]

@ben-grocholsky Thanks that helped me do it.

My tof_ir, tof_conf image feed is rotated 90 degrees counter clockwise when the drone is in a normal position, is there way to change that rotation

[Darshit Desai]

@Darshit-Desai @Moderator Can anyone reply on this post?

[Darshit Desai]

@Darshit-Desai Can anyone help with this? @tom

[ben grocholsky]

@Darshit-Desai this is a more generic ROS tf transform network question than anything specific to ModalAI devices. You can get any result you'd like by adding appropriate frames to map or vehicle in the tf tree. For example, since rviz is hard coded to expect z axis upwards and everything is easier with z axis down, I'll attach an ENU frame to every fixed map NED frame and vehicle carried body FRD frame. That allows for all algorithms to be implemented in NED/FRD and still use ROS visualization by selecting ENU frames as fixed and view.

Check out the tf documentation http://wiki.ros.org/tf2

The static transform publisher is a quick way to test changes. Then you'll want to explore using http://wiki.ros.org/urdf

[Darshit Desai]

@ben-grocholsky It shows up the same in VOXL PORTAL too.
Is there a way to get camera intrinsic Matrix of the ToF camera. Also, if I want to align the depth image with the RGB image how do I do that?

[Darshit Desai]

@Darshit-Desai I wanted to ask one more follow up to this question? The datasheet in voxl-documentation says the PMD TOF runs at 45 fps for ranging distances less then 1 metres. Is there a way to set that?

[Darshit Desai]

@Darshit-Desai @ben-grocholsky @Moderator

[Moderator]

@Darshit-Desai No, there is no current way to set that

[Darshit Desai]

@Darshit-Desai said in VOXL MPA_to_ROS rostopics not subscribing to anything:

@ben-grocholsky It shows up the same in VOXL PORTAL too.
Is there a way to get camera intrinsic Matrix of the ToF camera. Also, if I want to align the depth image with the RGB image how do I do that?

@Moderator

[ben grocholsky]

@Darshit-Desai the recommendation to learn about tf, urdf, and xacro in ROS was because that's a way to achieve what you're asking for. If you get the launch and config files right then ROS tools such as rviz will do what ever you want without writing any code.

[Darshit Desai]

@Darshit-Desai said in VOXL MPA_to_ROS rostopics not subscribing to anything:

Is there a way to get camera intrinsic Matrix of the ToF camera. Also, if I want to align the depth image with the RGB image how do I do that?

Hi sorry, I wanted to ask about the intrinsics that was highlighted by mistake. @ben-grocholsky