Collision Prevention
-
I've been following this tutorial to set the Collision Prevention on my starling: https://docs.modalai.com/voxl-vision-px4-collision-prevention-0_9/.
I have my VOA working.. I can see the VOA PC on the Portal and also on the debugger.. en_voa is set to true with DOF input, but when I try to fly in position mode, the drone is not avoiding collision.
In the tutorial it is said to set : CP_DIST: 1.5
CP_DELAY: 0.0
CP_GUIDE_ANG: 0.0
CP_GO_NO_DATA: 1 .. I don't know in which config file I should set that.. I understand that voxl-vision-px4.conf changed to voxl-vision-hub.conf, but I don't see those parameters there.. So even though the VOA is generating data, it seems that PX4 is not receiving, or if it is receiving is not doing anything with it. If I try to set those parapets on QgroundControl it fails to write.. .futhermore I was trying to debug that using px4-listener.. to see what king of info from VOA it is receiving (idk if that is the real use of this service), but I didn't find any documentation for the px4-listener.. on the docs I just see it being used to check for GPS signal. -
If I search for the word collision I get this files.. and indeed the .params hold those variables... Why is there different versions also ?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login