VOXL Mini 4in1 ESC conflicts with Power Module v3
-
@Eric-Katzfey is there such a version of the driver available?
-
@hmlow No, we will need to create that. If you are comfortable with px4 software you can make the change yourself to try it out.
-
@Eric-Katzfey The driver resides on PX4 and not the ESC itself (firmware)?
-
@hmlow Yes. The ESC firmware will send a message with battery information to the modal_io esc driver in PX4. The modal_io driver decodes that message and creates the PX4 battery_status uorb topic from it.
-
@Eric-Katzfey said in VOXL Mini 4in1 ESC conflicts with Power Module v3:
@hmlow No, we will need to create that. If you are comfortable with px4 software you can make the change yourself to try it out.
@Eric-Katzfey looks like i'll have to wait for that new feature instead
-
@hmlow , sorry for the inconvenience. I will add a parameter to disable the publishing of battery status by the ESC driver. Can you please confirm which version of PX4 you are currently using?
-
im running the version of the px4 that came with SDK 1.0.
On QGC, it says 1.14.0dev, custom fw ver 2.0.34 -
@hmlow , thanks. we should have an update very soon, hopefully by tomorrow.
-
@Alex-Kushleyev thanks for the assistance as always
-
@hmlow The new version is available here: http://voxl-packages.modalai.com/dists/qrb5165/staging/binary-arm64/voxl-px4_1.14.0-2.0.43_arm64.deb. This version has a new parameter MODAL_IO_PUB_BST that defaults to the value of 1 meaning it will send out battery_status messages. If you change that parameter to 0 it will stop sending out the battery_status messages.
-
@Eric-Katzfey thanks for the 2 fixes in a single package! Will try it out and report back tmr
-
@Eric-Katzfey It work! Thank you!
