ModalAI Forum

the hexagon sdk has been unlocked. It is under the miscellaneous folder: https://modalai.filecloudonline.com

@Engineer123

You can download all the necessary flat build files from our page: [modalai.filecloudonline.com](link url). Go into flat builds folder and download the m0054(154-1) flat build file

With regards to actually flashing the flat build, and using modal-qdl repo:

1. Make sure to put the flat build file properly in a correct folder as mentioned by the doc (./qdl/qfil_app/modalai). Make sure the file is unzipped (it should be m0054(154-1)/ all the files, NOT m0054(154-1)/m0054(154-1)/....)
2. Some users have seen a higher qdl success rate when they ran install_dependencies.sh and run.sh with sudo commands. So sudo might work better
3. Confirm that the voxl is in edl mode

@andrek Thanks for catching it! We just updated flat builds and now it contains m0054-2!

@WesleyHavocAI Thanks for catching it! We just updated flat builds and now it contains m0054-2!

@Jesus-Cardenas Flat builds should be available now!!

Flat builds should be available now!!

@Jesus-Cardenas There seems to be some work that still needs to be done on that folder. Please allow us couple of days and we will update this inquiry!

@Alan_S Thank you for catching this!!

We just uploaded voxl cross v4.8. It is in our docker images folder now on our downloads page!

@Jesus-Cardenas It should now be updated!

Should be available on our new Downloads page: [https://modalai.filecloudonline.com](link url) , inside the Flat Builds Folder

check the folder inside qdl/qfill_app/modalai/voxl2-mini_SDK......

Make sure that the ufc folder is present inside (occasionally after downloading the Flat Build and unzipping there might be voxl2-mini_SDL/voxl-2_mini_SDK). Make sure the path is qdl/qfill_app/modalai/voxl2-mini_SDK....../ufs

Edit: Also, you have the wrong download for the flat build. You are currently using the SDK instead of the flat build file. We will send you the correct link to the folder in a few minutes

@will-huang-oksi

Hello, thank you for your patience.

Can you run the lsusb command and let us know the output? (As the voxl is plugged in)