Hi all
I would like to know what is the current output specification for the power module V3.
Is it a standard 5V 3A output ?
Thanks & Regards,
Mohammed Naveed
Hi all
I would like to know what is the current output specification for the power module V3.
Is it a standard 5V 3A output ?
Thanks & Regards,
Mohammed Naveed
Hi all,
I have a silly question
I have been performing VIO flights indoor without any issue. So the drone I am working with is using a pixhawk 4 gps and i am flying indoor. The GPS is disabled but the compass is still enabled. So here is the silly question, I have been always facing north while powering up my drone. Is this method correct to do for performing VIO? My thought process is that the onboard compass is able to determine the true heading, but the VIO tracking camera considers the heading where it was powered on as north.(like if i face east and power on the drone, that heading would show as north on QGC) Wouldnt this create a compass variance error while navigation?
Moving to more advance thing!
How to perform an outdoor (open field) to indoor (basement) transition while in position mode? What should be the steps i need to follow and things i should keep in mind!
Thanks & Regards,
Mohammed Naveed
Hi @Chad-Sweet
Thank you so much!
Will have try it out first on the flight deck.
Thanks & Regards,
Mohammed Naveed
Hi all
I wanted to miniaturise my voxl flight deck, and want to know what aspects should i consider while i make a new flight deck style mounting for the hardware?
As per my understanding the stereo cameras need to be set at a specific distance apart.
However i wanted to know if any parameters need to be changed so the flight core knows where the stereo camera and the tracking camera are?
Thanks & Regards,
Mohammed Naveed
Hi @alarm_hq
You could swap out manual for stabilise mode.
Go to the Vehicle setup>flight modes and select it.
You are right in position mode you should be able to get x/y and z translation.
If you have any obstacles around you, then its probably the collision prevention preventing you from making X/Y translations .
I hope this helps you out!
Regards,
Mohammed Naveed
Hi all
I wanted to know whats the maximum capacity and class micro sd card i can use with the VOXL flight deck.( voxl and flight core)
Thanks & Regards,
Mohammed Naveed
Hi @hmlow
I am facing the same issue as well!
https://forum.modalai.com/topic/696/overlay-of-obstacle-during-collision-prevention
Thanks & Regards,
Mohammed Naveed