@modaltb Great to know. I needed at least 2.1 to get layer support for RAUC. Which I hope ModalAI will support RAUC or SWUpdate out of the box at some point. Or another framework for OTA updates.

@Alex-Kushleyev Sorry for not being clear on this. We are using VOXL2. From what I can see, this is also based on Jethro?

Re: Working with Yocto

Hi Eric (and team),

Are there still no plans to move on from Jethro?

@Chad-Sweet I haven't tried. However, I manage to get it working by doing a factory reset configuration of the VOXL2. Don't know why it made a difference though.

Hi All,

I can't get QGroundControl to connect to the internal PX4. I ran voxl-vision-px4 to setup the mavlink connection. voxl inspect shows the following.

Service Name | Enabled | Running | CPU Usage

docker-autorun | Disabled | Not Running |
docker-daemon | Disabled | Not Running |
modallink-relink | Disabled | Not Running |
voxl-camera-server | Enabled | Not Running |
voxl-cpu-monitor | Disabled | Not Running |
voxl-dfs-server | Disabled | Not Running |
voxl-imu-server | Enabled | Running | 0.0
voxl-mavlink-server | Enabled | Running | 0.0
voxl-modem | Disabled | Not Running |
voxl-portal | Disabled | Not Running |
voxl-px4-imu-server | Disabled | Not Running |
voxl-px4 | Enabled | Running | 0.0
voxl-qvio-server | Disabled | Not Running |
voxl-remote-id | Disabled | Not Running |
voxl-softap | Disabled | Not Running |
voxl-static-ip | Disabled | Not Running |
voxl-streamer | Disabled | Not Running |
voxl-tag-detector | Disabled | Not Running |
voxl-tflite-server | Disabled | Not Running |
voxl-time-sync | Disabled | Not Running |
voxl-vision-px4 | Enabled | Not Running |
voxl-wait-for-fs | Enabled | Completed |

The voxl-vision-px4.conf shows:

{
"config_file_version": 1,
"qgc_ip": "10.4.107.57",
"en_secondary_qgc": false,
"secondary_qgc_ip": "192.168.1.214",
"qgc_udp_port_number": 14550,
"udp_mtu": 512,
"en_localhost_mavlink_udp": true,
"localhost_udp_port_number": 14551,
"vio_pipe": "qvio",
"en_vio": true,
"en_send_vio_to_qgc": false,
"en_reset_vio_if_initialized_inverted": true,
"vio_warmup_s": 3,
"send_odom_while_failed": false,
"horizon_cal_tolerance": 0.5,
"offboard_mode": "off",
"follow_tag_id": 0,
"figure_eight_move_home": true,
"robot_radius": 0.300000011920929,
"collision_sampling_dt": 0.1,
"max_lookahead_distance": 1,
"en_tag_fixed_frame": false,
"fixed_frame_filter_len": 5,
"en_transform_mavlink_pos_setpoints_from_fixed_frame": false,
"en_voa": true,
"en_send_voa_to_qgc": false,
"voa_upper_bound_m": -0.15000000596046448,
"voa_lower_bound_m": 0.15000000596046448,
"voa_memory_s": 1,
"voa_inputs": [{
"enabled": true,
"type": "point_cloud",
"input_pipe": "dfs_point_cloud",
"frame": "stereo_l"
}, {
"enabled": true,
"type": "point_cloud",
"input_pipe": "stereo_front_pc",
"frame": "stereo_front_l"
}, {
"enabled": true,
"type": "point_cloud",
"input_pipe": "stereo_rear_pc",
"frame": "stereo_rear_l"
}, {
"enabled": true,
"type": "tof",
"input_pipe": "tof",
"frame": "tof"
}, {
"enabled": true,
"type": "rangefinder",
"input_pipe": "rangefinders",
"frame": "body"
}]
}

and the IP is correct. Nothing shows up at the QGroundControl client side.

@Chad-Sweet I believe this is what I need. Thanks.

I am wondering if anyone have experience using a Futaba RC system instead of Spektrum with the VOXL2?

Hi ModalAI, I have not yet acquired a VOXL2 board, but we are in the process of planning our new avionics roadmap. In this context, I need to know how log files are retrieved if VOXL2 is running the PX4 on DSP.
Best regards,
Michael Larsen,
Sky-Watch