ModalAI Forum

@jeremyrbrown5 we figured it out, we just changed the name of the model to yolov8n_float16.tflite. Pretty spot on now!

Hardware: (board / drone / SKU, serial # if you have it)
VOXL STINGER VISION MRB-D0013-6-V1-C33-T8-M26-X0
Software version: (paste the output of voxl-version)
1.8 SKD
What I am trying to do:
Greetings

Trying to integrate some T0F sensors with the stinger vision, specifically the VL53L4CX with the Stinger Vision. I've got a M0188 board, and I'm wondering what the pinouts are for the J01, J23, J45, and J67 MUX interfaces.

Thanks

Jeremy

Hi @Vinny

It was part of a larger purchase of about 18 systems (if i remember correctly) about a year ago. I will send the original order# when I locate it.

As far as our flexibility, we are adept at altering and modifying the systems for our needs, but we have a short timeline, and any product solution would need to be shipped overnight.

Is there any reason I cannot solder onto the board? It looks like the board has the traces for a TCA9548A mux, so I should be able to solder to that, unless there is something else I'm missing? My mistake on the address, actually saw the 0x73, nor 76, which is the lepton. Does that mean the board wouldn't be able to recognize it without an update to the firmware? If I remove the lepton and wire my own TCA9548A mux and ToFs, will that work?

Would love some clarification on the above.

Thanks!