Topics created by DanielHviid

@tom Curriously, it does not seem to accept -p 0000, which was our pin. We changed it to 1234, which is accepted, but that didn't help with the issue, and it acted identically to providing the wrong pin.

quectel-CM -p 0000 [03-02_13:02:16:064] Quectel_QConnectManager_Linux_V1.6.0.24 [03-02_13:02:16:064] unknow -p '0000' quectel-CM -p 1234 [03-02_13:02:39:300] Quectel_QConnectManager_Linux_V1.6.0.24 [03-02_13:02:39:305] Find /sys/bus/usb/devices/2-1.1 idVendor=0x2c7c idProduct=0x800, bus=0x002, dev=0x003 [03-02_13:02:39:307] Auto find qmichannel = /dev/cdc-wdm0 [03-02_13:02:39:307] Auto find usbnet_adapter = wwan0 [03-02_13:02:39:307] netcard driver = qmi_wwan, driver version = 22-Aug-2005 [03-02_13:02:39:308] Modem works in QMI mode [03-02_13:02:39:325] cdc_wdm_fd = 7 [03-02_13:02:39:399] Get clientWDS = 15 [03-02_13:02:39:430] Get clientDMS = 1 [03-02_13:02:39:462] Get clientNAS = 4 [03-02_13:02:39:494] Get clientUIM = 1 [03-02_13:02:39:526] Get clientWDA = 1 [03-02_13:02:39:557] requestBaseBandVersion RM502QAEAAR11A04M4G [03-02_13:02:39:686] requestGetSIMStatus SIMStatus: SIM_PIN [03-02_13:02:39:718] requestGetProfile[1] 3gnet/carl/1234/1 [03-02_13:02:39:749] requestRegistrationState2 MCC: 238, MNC: 20, PS: Detached, DataCap: UNKNOW [03-02_13:02:39:781] requestQueryDataCall IPv4ConnectionStatus: DISCONNECTED [03-02_13:02:39:781] ifconfig wwan0 0.0.0.0 [03-02_13:02:39:803] ifconfig wwan0 down

I tried adding the .so file to the hellocl example, and got the following error:

/usr/lib/gcc-cross/aarch64-linux-gnu/7/../../../../aarch64-linux-gnu/bin/ld: warning: libcutils.so.0, needed by /usr/lib/../lib/libOpenCL.so, not found (try using -rpath or -rpath-link) /usr/lib/../lib/libOpenCL.so: undefined reference to `property_get'

and when adding it to our OpenCV application, OpenCV still cannot find any OpenCL devices. I suspect OpenCV needs to be recompiled with the .so file in the docker image.

This issue is not immediately pressing, so if you intend to update the voxl-cross image I can wait for that instead of trying to create a fix.

Outstanding!

@Chad-Sweet

I found this. The 5G modem board also has a USB 3 port.
캡처.JPG

Then, all I need is this cable.
https://www.modalai.com/collections/cables-1/products/mcbl-00022