Thank you, the issue was resolved on my own.
An additional box helped to close the barometer. After installing it, there is no problem with height data.

ADB was not connected.
After connecting the fastboot board, it turned out to turn on the device in fastboot mode.
After connecting in the fastboot mode manually, using the fastboot command, the disk partitions were flashed, as is done in the install.sh script.
Problem solved

Is it currently possible with VOXL to stream in Full HD and record 4k30 from the M0025?

@Eric-Katzfey The documentation says about the ability to record 4k30 video. Currently, I don't care about the recording format.
I need to stream full hd and record 4k30 from camera M0025

@Eric-Katzfey camera MPA https://www.modalai.com/products/4k-high-resolution-sensor-for-voxl-8x8x5-8mm
format RAW or compressed
I need to stream full hd and record original 4k video.

@Alex-Gardner thank you very much

On the drone, the tracking camera and tof are installed in the front, the VOXL is shifted to the back, and the flight controller is installed in the center.
Where to specify offsets for sensors, VOXL and flight controller.
Thanks!

Please tell me how can record video in original quality from a 4k camera to a SD card?

@Cliff-Wong Thanks! Happened.
Please tell me how to record video to SD?

@Eric-Katzfey please tell me how to recording the raw frames coming from the sensor (voxl-camera-server) to a SD card?

@modaltb my FlightDeck have a barometer 3D printed cap.
But it was not tight, there was a groove in it. Maybe it was planned?
By completely closing the barometer, we fixed the problem.

ADB was not connected.
After connecting the fastboot board, it turned out to turn on the device in fastboot mode.
After connecting in the fastboot mode manually, using the fastboot command, the disk partitions were flashed, as is done in the install.sh script.
Problem solved