Hardware: Starling 2 Max Landing Legs CAD different from drone
-
We had a hard landing and one of the legs on our Starling 2 Max snapped. We're trying to print replacements for now before we make our next purchase with ModalAI, however, we noticed that the measurements on the CAD
(D0012-4-V3-C28-M36-T7-K0-Starling2-Max-V3-20260317.step) differs from the Starling 2 Max we bought (Dual 4k & Dual Tracking (C28) / WiFi and Ghost Atto 2.4GH
ECCN: EAR99, NLR). The legs on the CAD are fitted for a smaller motor.Would you be able to either provide specifications for the motor, or updated drawings reflecting the wider legs used on our Starling? Thank you.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login