VOXL2 can not connect to ethernet by type C (J9)
-
My issue: I can not connect to Ethernet via type C (J9) by adapter (i tried other hub). I followed these steps to flash the boot image from Modal AI here: flashing-guide.
My question: have any one can connect to Ethernet via type by adapter? I would like to know if we can connect to Ethernet without any extension board.
My check:
No log from kernel/journal when plugged in/out. I checked some drivers related to Ethernet from dmesg as- r8152
- ax88179_178a
- lan78xx
- smsc75xx
- smsc95xx
- driver generic USB: cdc_ether, rndis_host, cdc_ncm, cdc_mbim, qmi_wwan
Hope to receive your answers, thanks a lot.
-
H Huynh Gremsy referenced this topic on
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login