Integrating lidar sensor
-
@Muqing-Cao No you'd likely want to use an add-on board, this would be the cheapest option to give you a USB-A connector that you could attach a USB to ethernet adapter: https://www.modalai.com/products/m0141?variant=46829445513520
-
@tom I see. which port on the voxl 2 should i connect this board to? I wonder if this port has been already occupied on the starling 2 max drone.
-
@Muqing-Cao On Starling 2 there is likely a wifi dongle in that port
-
@tom Ah... So what is your recommendation in this case? We need both wifi and connection to a ethernet device.
-
@Muqing-Cao If you don't want a bulky USB hub on there you can use a different add-on board like this one: https://www.modalai.com/products/m0130-3?variant=48186331693360
it has 1 USB 3.0 and 2 USB 2.0 ports
-
@tom I see thanks. How about this one: https://www.modalai.com/products/m0062-2?srsltid=AfmBOoq_b52cK1R5X-8pluAer7oqq-BJb2Y1E2yUVsF2lFkwMl7mAFo2
It already has a usb and ethernet port, which seems to be more ideal for my case. Can it be fitted to starling 2 max without causing other issues? -
@Muqing-Cao Yes that would work as well
-
@tom Thanks. I will get one of that.
About using another state estimation source, can you suggest me how to do that? Say we can get lidar-based position estimate in ROS message, can we disable the onboard VIO and feed our position estimate to the onboard flight controller through MAVROS or something else? Please advise. -
@Muqing-Cao said in Integrating lidar sensor:
About using another state estimation source, can you suggest me how to do that? Say we can get lidar-based position estimate in ROS message, can we disable the onboard VIO and feed our position estimate to the onboard flight controller through MAVROS or something else? Please advise.
Please help advise on this question, thanks
-
@Muqing-Cao Did you get this working? I was able to get state estimation with the Mid360 through MAVROS, but am now thinking about getting some LiDAR and camera vision fusion for a more robust approach.
