Rotate imx412 stream
-
Hello everyone,
I have accidentally turned my camera 180 degrees. Turning it round does not work because it is firmly attached to a bracket.
How can I rotate the video stream 180 degrees again? Where can I configure this?Best regards,
Tom -
@TomP Any ideas? There should be a rotation parameter somewhere.
-
@TomP ,
Are you using MISP in your config file or the Qualcomm ISP?
there are typically two ways to rotate the image stream:
- read out the image backwards (typically a one or two register change in the camera configuration)
- reverse readout will also typically reverse the bayer pattern (RGGB vs BGGR), so whatever is doing the debayering also needs to be aware of the bayer pattern change
- rotate image post readout in ISP or GPU, although i believe even the Qualcomm pipeline does the rotation in the GPU (however we have never used the rotation in the QC pipeline within voxl-camera-server).
For some cameras like OV7251, OV9782, AR0144, the
en_rotate
flag fromvoxl-camera-server.conf
causes the appropriate registers to be updated to set the reverse readout and then the same flag is also used for correctly debayering (in ov9782 case). https://gitlab.com/voxl-public/voxl-sdk/services/voxl-camera-server/-/blob/dev/src/cci_direct_helpers.cpp?ref_type=heads#L73For the IMX412 we have not made that option available yet, but i know it is trivial to do, so i can make that change.
If you do use the QC ISP pipeline (using small_encoded or large_encoded streams), in order to make this work, we actually generate another
sensormodule
driver that sets the reverse read-out registers and informs the isp pipeline that the Bayer pattern is reversed. This is not ideal because we need to maintain another set of sensormodule drivers.. Ideally, there would be a flag in ISP pipeline to cause the rotation, but the following does not seem to work: https://gitlab.com/voxl-public/voxl-sdk/services/voxl-camera-server/-/blob/dev/src/hal3_camera_mgr.cpp?ref_type=heads#L87 (the flag used to set rotation in stream requests below in the same file)Please let me know which streams you are actually using for IMX412 and I can help you.
Alex
- read out the image backwards (typically a one or two register change in the camera configuration)
-
@Alex-Kushleyev We use the ISP mode (“ae_mode”: “isp”) and the hires_small_encoded pipeline.
Thank you very much for your support. -
@TomP , ok no problem. I can add rotated sensormodules to our release and send you a copy. One more question - can you please provide me exact sensormodule name for imx412 that you have in /usr/lib/camera ?
-
@Alex-Kushleyev The most current file name in the list in the directory is com.qti.sensormodule.imx412_flip_2.bin.
We have ordered and installed this camera:
Image Sensor 4k High-resolution, Low-light Sensor for VOXL
(Starvis IMX412 w/ micro-coax & M12-style Lens) (MSU-M0161)
-
@TomP , actually there is already non-flip version in /etc/modalai/chi-cdk/imx412 . You can just use the sensormodule from that location with the same slot id (index at the end of sensormodule). Back up the current sensormodule (move it out of /usr/lib/camera/ or rename to .bak) and put the new one in the same location.
Alex
-
@Alex-Kushleyev the chi-cdk directory does not exist. here is the content of the /etc/modalai/ directory:
voxl2-mini:/etc/modalai$ ls
extrinsics.conf voxl-camera-server.conf voxl-px4-hitl-set-default-parameters.config
extrinsics.conf.thermal voxl-cpu-monitor.conf voxl-px4.conf
lost+found voxl-dfs-server.conf voxl-streamer.conf
network_interface_preferences.txt voxl-elrs.conf voxl-tag-detector.conf
tag_locations.conf voxl-imu-server.conf voxl-tflite-server.conf
vio_cams.conf voxl-mavlink-server.conf voxl-uvc-server.conf
vio_cams.conf.boson voxl-modem.conf voxl-vision-hub.conf
vio_cams.conf.seek voxl-px4-fake-imu-calibration.config voxl-vtx.conf -
@Alex-Kushleyev I have now found the correct file in the /usr/share/modalai/chi-cdk directory. Now everything works as it should. Many thanks for your support!
-
@TomP , oh yeah, my bad.. you found the right one