Help with Connecting a Second SPI Device on VOXL2 J10
-
Hello everyone,
I’m currently working to connect external SPI devices to the VOXL2 and integrate them in PX4. I’ve successfully managed to connect a device to J10 (apps_proc SPI) at /dev/spidev14.0 and manage it from PX4.
Now, I’d like to know if there’s a way to use the second chip select line (CS1_N/GPIO_46) to manage two devices. I initially thought that the second device would show up as /dev/spidev14.1, but it is obviously not present. Is it possible to achieve this? Does it require a kernel rebuild?
Any guidance or suggestions on how to approach this would be greatly appreciated!
Thank you in advance for your help!
Best,
Piter
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login