Pin Assignments for voxlCAM Connectors to Jetson Nano
-
Hello,
I am trying to connect the voxlCAM to a Jetson Nano using the connectors instead of the USB cable. The voxlCAM has three visible connectors, and I need detailed information on the pin assignments and how to utilize these connectors for connection.
Could you please provide documentation or guidance on the pin assignments for these connectors and any necessary steps to successfully connect the voxlCAM to the Jetson Nano?
Thank you for your assistance.
Best regards,
-
Hello,
I am trying to connect the voxlCAM to a Jetson Nano using the connectors instead of the USB cable. The voxlCAM has three visible connectors, and I need detailed information on the pin assignments and how to utilize these connectors for connection.
Could you please provide documentation or guidance on the pin assignments for these connectors and any necessary steps to successfully connect the voxlCAM to the Jetson Nano?
Thank you for your assistance.
Best regards,
@藤田真也 Inside for VOXL CAM is a VOXL 1. The datasheet which describes the VOXL 1 connectors is here: https://docs.modalai.com/voxl-datasheets-connectors/
-
@藤田真也 Inside for VOXL CAM is a VOXL 1. The datasheet which describes the VOXL 1 connectors is here: https://docs.modalai.com/voxl-datasheets-connectors/
@Moderator
Hello,Thank you very much for your prompt response and for providing the link to the datasheet for the VOXL 1 connectors. This information is exactly what I needed. I appreciate your assistance and support.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login