ModalAI Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Register
    • Login

    Failure to open port during ESC Calibration of VOXL Flight

    VOXL Flight
    1
    1
    126
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • J
      jacobcayetano1
      last edited by

      I am attempting to calibrate ESCs using the procedure outlined here: Flight Core PWM ESC Calibration.

      The procedure fails with the following text:

      Using portname /dev/serial/by-id/usb-ModalAI_PX4_FMU_ModalAI_FCv1_0-if00
      connecting...
      Error: Unable to open port

      I have mostly been running it with a USB connection, but the UDP method failed similarly.

      I have also tried to do it through QGroundControl, but to my understanding, since FCv1 did not support power through USB, it is not possible to use the QGroundControl calibration on the VOXL Flight/FCv1.

      Thanks in advance.

      1 Reply Last reply Reply Quote 0
      • First post
        Last post
      Powered by NodeBB | Contributors