Flightcore v2 update
-
I have been having trouble calibrating my compass so I figured I would update the flightcore v2. Of course following the instructions using the ./Tools/px_uploader.px had a few erros and didn't run so my question is will there ever be a fix to update this using QGC? I tried mission planner and that only had the option for modalai flightcore ver1. My drone is ready to fly, I was hoping to update the Fc before I attempt this but then again I have reached my stress limit with this VOXL-Cam and will probably shelve it for a while. Funny it says using a simple python script, so far the lack of clarity and instruction has made it anything but simple. as for the developer guide I'll just hope it can be figured out how to update with qgc, then again I'm at the point where I dont think this setup will ever work
-
I was able to use the v1.13.2-0.1.1 file with mission planner, it connected but said update was not required. I will keep an eye out for the v1.13.2-0.1.2 drop. Looking into my compass setup, its a new release from MRO, could be an issue there
