How to send MAVSDK commands from Raspberry Pi AI to the M500
-
Hello, I'm trying to configure the MAVLink on my m500 to receive MAVSDK commands from a raspberry pi I have attached to my aircraft running an AI trained to move the vehicle and identify ducks.
The aircraft will travel with a constant altitude, constant roll, and only the thrust and yaw values will change. What do you suggest would be the best method of passing MAVSDK flight
commands from the raspberry pi to the px4. The raspberry pi has a direct connection to the micro-usb port on the VOXL, and I was going to attempt to use that, but I wanted to get some suggestions first.
Any tips would be helpful, thanks! -
Please review the External UDP Mavlink Connection documentation
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login