ModalAI Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Register
    • Login

    About camera configuration for M500 frame.

    VOXL m500 Reference Drone
    2
    3
    254
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Kaiba-KunK
      Kaiba-Kun
      last edited by

      Hello, i want to ask about camera configuration. After reset m500 by voxl-configure-modalai-vl and setup again follow the guide. I also re-config voxl-vision-px4 to the factory set-up because it's look like when reset modalai-vl the NED position also lost. When i tried with position mode it seem the UAV flies is not good as well as the first time flight.

      • for voxl-configure-cameras i choose the option 3.
        c6237751-57a1-4d03-9c33-f76409bbb05c-image.png
      • Here is some information. i think the config is not same as the manual document.
        026e376e-a37d-4bc3-875a-0f89bb7e55b5-image.png
        9fb042a5-2d32-4977-8826-2783d678ea41-image.png
      • cat /etc/snav/camera.downward.xml
        1e777ba3-0f60-4123-88a1-29548a24957a-image.png
        e9378da2-2676-4541-9203-6c32452cecab-image.png
      • cat /etc/snav/camera.stereo.xml
        cf54d95d-6b48-42c0-b7ee-705b4033e266-image.png
        923e47e6-edd9-43b6-8748-9fc7149facb0-image.png
        -> Did i was wrong? M500 driff so much when tried to flies in position mode.
      1 Reply Last reply Reply Quote 0
      • Kaiba-KunK
        Kaiba-Kun
        last edited by

        do you have any idea? @modaltb.

        1 Reply Last reply Reply Quote 0
        • modaltbM
          modaltb ModalAI Team
          last edited by

          Hi @Kaiba-Kun ,

          Hmm, we normally use voxl-configure-vision-px4 when setting up the vehicle.

          For the m500, we have a -f option which will set it to factory state with respect to voxl-vision-px4, so voxl-configure-vision-px4 -f

          The camera configs in the ENV variables should be fine after this.

          I'd try that option above, if you've configured your GCS IP address in the config file needs to be updated, eg.

          vi /etc/modalai/voxl-vision-px4.conf and setup your GCS IP after running with the -f flag.

          After that, I'd then reboot the system, and then do a 'hand flight' validation, where you can pick the vehicle up and move around, validating local position NED in QGC.

          Here's a video where I do this: https://youtu.be/gTuSaHLCz8w?t=571

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Powered by NodeBB | Contributors