QGC connection problem
-
We had the flight controller lose connection to the ESC's
To fix that I tried to redownload parameters.
We had multiple parameter download failures and now QGC cannot connect to the VOXLWe can see the board connect and add a comport, but is not recognized by QGC.
It says on pX4 that there is likely a problem with the hardware at the OS level. How do we fix that? -
Please try loading new firmware and let us know if that works https://docs.modalai.com/flight-core-firmware/
-
This post is deleted! -
@Chad-Sweet That worked! After I did the reinstall, it would not connect. I closed and reopened QGC, switched the usb cable, and then went into the auto-connect section of the general settings and disabled the NMEA GPS device drop-down.
Thank you Chad!