Has anyone ever used vlan 8021q on VOXL1?
-
One of the modems we may use comes up over USB and presents itself to the host as a network interface. the documentation says that the linux host needs vlan (8021q kernel module).
Has this ever been used on VOXL1?
If not, is there any reason it couldn't be installed?
Thanks,
Ed -
It's safe to say we have not tried it.
You can build the kernel using the instructions here: https://gitlab.com/voxl-public/system-image-build/voxl-build
-
Thanks Chad...
I'll dig into this; meanwhile, someone here suggested that perhaps we can fork the kernel, then just build the module and install that with modprobe (without actually updating the on-board kernel).
Has that kind of thing ever been done with VOXL1?
Ed
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login