VOXL 2 I/O and GPS
-
I'm attempting to set up a system that will use both the M8N GPS and the IO expansion board. However, they each seem to take up the same connector, J19, on the VOXL 2. Is there a cable that allows both to be connected at the same time? If not, can I make my own connector? If so, what is the make/model of the connectors used on the VOXL 2. Any info is appreciated.
-
I'm attempting to set up a system that will use both the M8N GPS and the IO expansion board. However, they each seem to take up the same connector, J19, on the VOXL 2. Is there a cable that allows both to be connected at the same time? If not, can I make my own connector? If so, what is the make/model of the connectors used on the VOXL 2. Any info is appreciated.
@Moderator Yes, we can build a custom one and get it listed soon.
However, in the meantime, you can start with our MCBL-00061 and add in additional contacts needed for the uBlox module.
Here is MCBL-00061:
https://docs.modalai.com/cable-datasheets/#mcbl-00061
and a purchase link: https://www.modalai.com/products/mcbl-00061
and then you can follow the tips here to help you add in extra contacts and the shroud for your uBlox module (we are making more updates to this site weekly)
https://docs.modalai.com/cable-userguides/Let us know if this helps!!
Thanks -
V valvarez referenced this topic on
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login