Architectural review request: VOXL 2 for high-altitude VIO and encrypted RTSP routing
-
Hello everyone,
I am looking for some expert advice on a VOXL 2 companion computer setup for a long-range platform. I have two main integration challenges:
Challenge A: VIO at Higher Altitudes
To solve the motion blur and pixel density issues at higher altitudes, I am planning a 6-camera configuration. I want to use 4 downward-facing sensors (2 daylight + 2 IR) equipped with narrow-angle lenses, alongside 2 standard wide-angle sensors (front and rear).Could you advise on the best supported sensors (e.g., IMX series) for this? Has anyone successfully tuned the voxl-qvio-server for narrow-angle lenses, and what were the altitude limits you achieved?
Challenge B: LAN Integration & WireGuard
The payload data flow will be: External RTSP Camera -> Ethernet -> VOXL 2 (WireGuard encryption) -> Ethernet -> Digital RX.Because VOXL 2 lacks multiple LAN ports, I will need a miniature industrial Ethernet switch. Does ModalAI have any tested hardware recommendations for this? Furthermore, what is the best practice for routing this VPN traffic through the VOXL 2 Ubuntu environment without bottlenecking the CPU?
We are currently evaluating the VOXL 2 for a broader fleet deployment and want to ensure the ecosystem can support this custom optics requirement.Any feedback on off-the-shelf solutions or standard configurations for this use case would be greatly appreciated.
Thank you! -
For VIO, I’d validate the narrow-angle concept with two downward cameras first: narrower lenses reduce overlap and feature availability, so check calibration stability and feature counts before committing to six. Also confirm the supported IMX sensor list and MIPI/CSI bandwidth limits in ModalAI’s docs. For routing, keep only the RTSP camera subnet in the WireGuard policy using nftables/policy routing rather than sending all traffic through the tunnel, and benchmark WireGuard throughput plus CPU with iperf3 before fleet deployment. A suitable industrial unmanaged switch should work if power, thermal and MTU are checked.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login