GPS and Compass Issues on QGround Control
-
Hello
We are having a issue with our Voxl 2 mini being unable to run missions.
We have an M10S GPS and a QMC5883L compass (the 3DR board) attached.
Both voxl-inspect-gps and px4-listener report that the board is working
We calibrated the compass and we have a fix in QGround
However, we are unable to use the mission or PosHold flight modes.
The errors we recieve are "no local position" and "no global position"
While our mounting isnt optimal, we do not believe it's due to noise, as our arming status changes from "Ready" to "Not Ready" whenever we select a gps dependent mode
Is there another setting in the parameters or the voxl we are missing?
Thanks
Jeremy -
Hello
We are having a issue with our Voxl 2 mini being unable to run missions.
We have an M10S GPS and a QMC5883L compass (the 3DR board) attached.
Both voxl-inspect-gps and px4-listener report that the board is working
We calibrated the compass and we have a fix in QGround
However, we are unable to use the mission or PosHold flight modes.
The errors we recieve are "no local position" and "no global position"
While our mounting isnt optimal, we do not believe it's due to noise, as our arming status changes from "Ready" to "Not Ready" whenever we select a gps dependent mode
Is there another setting in the parameters or the voxl we are missing?
Thanks
Jeremy@jeremyrbrown5 We have figured it out. It was the parameters SYS_HAS_MAG and SYS_HAS_GPS. Will be testing autonomous flight tomorrow!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login