Hello all!
Just curious to know if someone has actually tested the Starling 2 max drone's 55 mins endurance. I've checked the datasheet of T-motor F2203.5 1500Kv and it doesn't seem to support 4S voltage for the 1500Kv motor. Can someone please provide the motor specifications?
@Alex-Kushleyev Thank you for the reply
Currently we are buying Voxl2 flight deck from you, I will be integrating in my drone after integrating what I need to do how to make it fly autonomously can you guide that how sdk works and how 3d map will be created how we need to plan a machine in the sdk
@Tamilselvan For the previously mentioned use case of "having a 360° obstacle avoidance and VIO" for indoor inspection drone, can the following camera configuration be used?
: - One "Image Sensor 4k High-resolution, Low-light Sensor for VOXL
(Starvis IMX412 w/ micro-coax & M12-style Lens) (MSU-M0161)" in the front side for video streaming & recording and QR code identification.
&
Five PMD TOF sensors on the front, back, left, right and top sides for SLAM & obstacle avoidance.
Greetings,
I am currently working on building a quadcopter tailored for warehouse inspection applications. For this purpose, I have chosen Modal AI's VOXL 2, primarily for its VIO and VOA features. While I have reviewed the documentation thoroughly, I still have a few unresolved questions. I have compiled these queries and would greatly appreciate it if someone could assist me in addressing them.
Can "VOXL ESC FPV 4-in-1 with Built-in Power Module (MDK-M0138)" be used with Non FPV motors such as "T- Motor - MN4004 Antigravity Type 4-6S UAV Motor KV300"?
What is the suggested VOXL 2 Camera configuration for having a 360° obstacle avoidance and VIO? How to decide on imaging sensors, whether it is stereo, tracking, or/and TOF? And how to decide how many are required and where to position them? What is a Tracking camera used for?
How to select how many thermal cameras are required and their position for the drone which requires to operate in no light conditions. Can TOF sensors be used for no light indoor space navigation?
What are some special cases when external flight controllers have to be integrated with VOXL 2? What is the limiting factor here?
Are there any expansion boards available to increase the number of camera connections?
In Wi-Fi based data transmission, can both UAV telemetry and video data be transmitted? using "Alfa Network AWUS036EACS 802.11ac AC600 Wi-Fi Wireless Network Adapter". What modules are used to get UAV telemetry wirelessly?
is there any other thermal can support other than flir boson. if it supports suggest the model
Is there any possibility to use T-Motor MN2806 with VXOL FPV 4 in 1 ESC
if we can use kindly share details how we can integrate
i need a clarification on which cameras and extension boards i need to use for voxl 2 gps denied flying
@Eric-Katzfey what if i connect external camera which as an hdmi or usb output to VOXL 2 then also i can stream this camera input via micro hard as rtsp right.
I am interested in using voxl2 in my drone for gps denied environment and I need get my telemetry data over 2km so I choose pmddl2450 which as 256-bit AES encryption so kindly clarify me that how it shares the telemetry data and can I able to see real time video over micro hard in my GCS