Was wondering if it was possible to use the VOXL IO expander with the VOXL2 Mini? I'd like to get some additional PWM outputs for a custom vehicle design using the mini and it looks like if I make a custom cable to connect the UART on J4 of the IO expander with one of the UARTs on J19 of the VOXL2 Mini (this is the part I'm a little unclear on, not sure which UART it's meant to connect to, maybe it's supposed to go to J10 on the mini?) that this might work? Any information you could provide would be very welcome, thank you.
N
nshahrestani
@nshahrestani
Posts
-
Using VOXL IO Expander with VOXL 2 Mini? -
Starling 2 Max CAD modelWould it be possible to get a version of the Starling 2 Max CAD model that also includes the subassemblies? Seems like the STEP files that are currently in the developer downloads were exported flat and I’m seeing weird behavior in Solidworks trying to suppress/open subassemblies.
-
VOXL2 Input Voltage SpecWhat is the minimum and maximum allowable voltage for the 5VDC input to the VOXL2 main board? Looking to replace the power module with something smaller and want to make sure the voltage going to the VOXL2 is within spec. Thanks!
-
VOXL2 Max Power DrawThat all makes sense, thanks! I'm incorporating just the VOXL2 and a 5G breakout board into a design where weight is a critical design aspect and was looking to spec a smaller voltage regulator than the included power module hence the question. You mentioned that you specify power draw for various breakout boards, I can't seem to find that information could you point me to where that might be? Thanks
-
VOXL2 Max Power DrawPerhaps I'm just missing the appropriate documentation, but is the max power draw of the VOXL2 stated in a datasheet? Thanks!