Hello LaborzaubererTHI,
You can see the video now as it has been set as unlisted.
https://www.youtube.com/watch?v=jjCKZmrqrVQ
Sorry for that.
Regards
Hello LaborzaubererTHI,
You can see the video now as it has been set as unlisted.
https://www.youtube.com/watch?v=jjCKZmrqrVQ
Sorry for that.
Regards
Hello Voxl Team,
I've checked the vibrations during 15 min flight and it seems like they occur on accelerometer as it's reflected on the video. Please let me re-model my Voxlcam holder and get back to you.
Or.. Is there any other potential issue why those vibrations occurred. Gyro XYZ is stable however accel has them too much.
https://www.youtube.com/watch?v=jjCKZmrqrVQ
Regards
Hello,
I've tried to test your voxl cam for the first time, first of all I've tried to leave a drone in the same position 2 metres above the ground for approx.15 minutes, drone held position very smooth and stable, nothing occured during this operation. Then I've decided to fly a little bit higher above the tree and unfortunetly I got some errors which forced that my drone switched from loiter mode to land mode as a failsafe. Furthermore situation appeared in the same way everytime when I've tried to fly above tree, which during the flight has a lot of moving points (like branch or leaves). Can you advise what could be a potential cause for above behaviour.
Below I attach link which reflects exact case.
https://www.youtube.com/watch?v=b_4IsZeIQas (Error starts at 1;40 min )
Also.. You can see in the log that during the failsafe visio odometry cut down
https://imgur.com/a/6DwytzS
https://drive.google.com/drive/folders/1BW4fhUM0Chb7pPKDekNavZtCjvXJfTE_ (All logs and videos are contained here)
FYI I am using ardupilot software
Hello,
Me and my team are building a drone for cleaning roofs, facades ect. Especially for difficult and high surfaces.
I just wonder if voxl cam will find an adhibition in this case. It is because sensors have big fov (reflected on the below image) and it will see a lance made from carbon which is 12mm diameter, and also a hot water from lance that came during the operation.
The next thing is a hose which is going directly from under the drone straight till the ground.
I guess that the arms and propellers also will be visible for the sensors.
My questions is whether those things won't disturb readings from voxl cam and if the drone stays stable seeing described parts of the drone.
Can you guys fully explain what cameras consider while sensors scan the surface?
Regards,
Rafal