Topics created by daniel.p.nikolov

@daniel-p-nikolov said in Issue recognizing camera MSU-0107 using M0135 dual camera board:

Tried various setups, however, it does not see any camera connected to the VOXL2.

Reply

@daniel-p-nikolov I would recommend doing a custom camera config setup. What you can do here is run voxl-configure-cameras C and then vim into /data/modalai/custom_camera_config.txt and then proceed to edit the file for this port and position - so in this case it would be

J7 lower info is hires, imx412, and false.

Then proceed to rerun voxl-configure-cameras C again and then rerun voxl-camera-server and see if cameras are detected. There could be a mismatch occuring of the port and such when using the non custom script.

Zach

@ayrric yes, you can find it here: https://www.modalai.com/products/m0155

Hi,

When running lsmod I would expect to see a list of different kernel modules including the 88XXau kernel module which is the driver for that wifi dongle. Luckily we've also included the kernel module in the Voxl2 file system under the path: /lib/modules/4.19.125/kernel/drivers/net/wireless/88XXau.ko
I would suggest first trying to load this kernel module using the insert module command:

insmod /lib/modules/4.19.125/kernel/drivers/net/wireless/88XXau.ko

You should then run ifconfig and see if the wlan0 interface appears, if it does then the module has been successfully loaded and you should now be able to use your wifi dongle.

However, I do recommend upgrading your system image by installing our newest 1.3.1-0.8 platform release. This will upgrade your system image to 1.3.1 and install the 0.8 SDK. This can be found on our downloads page. I recommend doing this because for some reason all your kernel modules are missing. I'm not sure what might've caused this, but it might lead to other issues.

Moved to https://forum.modalai.com/topic/1481/5g-add-on-board-accessing-the-quectel-module-linux-shell