ModalAI Forum

Hi @A-Evans This is our current WiFi solution for Voxl2, or any ModalAI board with a standard USB2 4-position JST GH port. https://www.modalai.com/products/wifi-usb-cable-add-on?_fid=da227b041&_pos=1&_ss=c If you want to use our 10-pin USB3 format connector for the Alpha USB Dongle, then you can also consider using this cable: https://www.modalai.com/products/mcbl-00022 Note: We use Alpha WiFi since it's NDAA compliant You are free to use any WiFI USB dongle sourced at the UK, and make your own cables for USB2 (not too hard for proto-type builds).

@A-Evans You're welcome, glad I could be of assistance. You do have to tighten the nuts well, but not white knuckle tight. You will feel it tighten and then give it an extra little after that. We have been trying to source any of the nuts but they are all out-of-stock. You can check any hobby store or Amazon. If you're trying to get the lock nuts, look for the aluminium ones. There's a lot of steel ones available. You're looking for M6's

@modaltb Thanks for this, managed to just reinstall a few packaged from there, bit nervous to go the factory reset, we've had the drone for a while now but we are going to try a first flight soon. seems okay.