Hello,
Any followup on this?

Hey @modaltb this seems to be an intermittent thing that stops working at inconsistent intervals. It seems like something triggering the ifconfig to be deactivated on eth0. We are currently testing it with dhcp disabled on the modems and commented out "dhcpcd eth0" in /etc/initscripts/setup_ethernet.sh

Let me know what you guys find. Maybe brainstorm anything that might cause an intermittent reset on eth0? Is seems to boot up correctly then die

Happy Holidays!

The system image is 3.3.0 with 0.5.0 voxl suite. Just downloaded and flashed the latest one from the developer resources page before this test.

Hello, I think I have a question for @tom

We are using a voxl-flight with a microhard add-on board with a pDDL900 in the socket.

The symptoms we are seeing is the modem booting up correctly sometimes and after running dmesg we see errors related to wcd9335. It seems like a conflict with usb devices but we aren't sure.

Here is the dmesg for more information.
https://flyvoly-my.sharepoint.com/:t:/p/bgrocholsky/EfsK-HaEl8BKtn2yXtPQFoAByGDu8L2SYYkdEOCTN-Vz6A?e=I09nMp

Is this a known issue? Can you replicate this on your end? Is there a workaround?

Hope to hear from you soon,
Eli

Hello,
We have been having a strange behavior with the tracking camera. The exposure setting is bouncing around and giving unusable images.

Video

We did not have the same issue indoors. It seems to be related to overcast because we previously did not have this issue with a clear sky.

Have you seen this happen before? Is there any more data you need to diagnose what is happening?

Is there any information/options for the agc? Is this an issue with hardware?

-Eli

Thank you so much!

Thanks for the quick reply!
The only issue is

but also:

I tried rebooting as well. How do I resolve this?

Hello,
I ran "opkg update" then "opkg upgrade" which made me run into a dependency issue
"Not selecting librc_math 1.1.2 as installing it would break existing dependencies.
Not selecting opencv 4.5.1 as installing it would break existing dependencies.
Not selecting libmodal_pipe 1.2.2 as installing it would break existing dependencies."
Additionally I tried " opkg install voxl-camera-calibration" and got "Not selecting opencv 4.5.1 as installing it would break existing dependencies."

How do I resolve these dependency issues to get the camera calibration feature?

Thanks!

Okay, I will send it your way and put your name on it. What is the address I should send it to?

Sorry I cannot recall if there was significant heat coming from it before it went out.
I never plugged a USB cable into the flight core side. I only communicated through voxl-vision-px4.
I don't see any chaffing on the wifi antenna shielding either. I did plug a usb cable into the voxl side for adb communication several times and cannot recall if there was a spark but honestly I was not looking for it.

If a short formed somehow is this board dead? My main concern is making sure I don't kill the new board I am working with in the same way.