@Dylan-Lau said in Safety Setup parameters missing from firmware:

@Adrian-Hidalgo Here is the px4 parameter file: link text

Hi @Adrian-Hidalgo, may I know if there is an update? We thought of some workarounds but since it deals with safety, it is better to implement something with the support team's expertise.

We found https://gitlab.com/voxl-public/flight-core-px4/px4-parameters/-/blob/master/platforms/master/temp1.params and https://gitlab.com/voxl-public/flight-core-px4/px4-parameters/-/tree/master/platforms/v1.13/M500 and so should we use this instead of the default one we have from the system image?

Cheers
Dylan

@Adrian-Hidalgo Here is the px4 parameter file: link text

Hi @Adrian-Hidalgo, the same error message persist after the upgrade to the latest Voxl release.

Any ideas? It says missing params: 1:5DLOG_MODE

Is there a parameter file for the sentinel that we need to upload/configure beforehand?

Cheers~
Dylan

Thanks Adrian for the quick response!

I am using QGC v 4.2.4. Will upgrade to the latest Voxl release then and see how it goes.

Cheers~
Dylan

Hi,

I just setup the Sentinel and managed to connect to QGroundControl.

However there seems to be an error when I try to configure the Safety Setup. Is there something wrong with my firmware?

/home/amokduke/Pictures/Screenshots/Screenshot from 2022-12-05 14-54-09.png

These other the other settings...
file:///home/amokduke/Pictures/Screenshots/Screenshot%20from%202022-12-19%2011-46-05.png

Cheers~
Dylan