VOXL PWM AUX output not working
Cole Mathieu last edited by
I'm currently trying to connect a servo to test PWM output on AUX1 and nothing seems to work to get any real output to the servo. I have supplied it with 5v power and currently have RC_MAP_AUX1 set to Channel 5. And I have the servo signal wire connected to pin 5 on the PWM breakout board from plug J1007. I assume I'm doing something wrong and hopefully someone can point it out to me, thank you!!
Hi @Cole-Mathieu ,
We have a little bit of documentation here with respect to AUX outputs. The FlightCore form factor only has the 8 PWM outputs, so it's a little limited, but we've used it to control a two channel gimbal: