Communication through J18
-
@Eric-Katzfey Hi again, can we expose another UART port for programming on the Voxl2?
@Filip-Slezak-0 Thinking about ttyHS2 or ttyHS3 maybe shown here https://docs.modalai.com/voxl2-linux-user-guide/#uarts
-
@Filip-Slezak-0 Thinking about ttyHS2 or ttyHS3 maybe shown here https://docs.modalai.com/voxl2-linux-user-guide/#uarts
@Filip-Slezak-0 please see here: https://docs.modalai.com/voxl2-linux-user-guide/#apps-proc, we have ttySH2/ttyHS3 routed to the B2B connectors, but you need a carrier board to pick them up...
For example, ttyHS2 goes to our
M0090 - 5G Add-On Board J9 Pins 2/3 (Tx/Rx)
-
@Filip-Slezak-0 please see here: https://docs.modalai.com/voxl2-linux-user-guide/#apps-proc, we have ttySH2/ttyHS3 routed to the B2B connectors, but you need a carrier board to pick them up...
For example, ttyHS2 goes to our
M0090 - 5G Add-On Board J9 Pins 2/3 (Tx/Rx)@modaltb Hey, thanks for the quick reply. Unfortunately, none of these work for us since it seems exposing one port prevents us from accessing another (I also can't find a ref to buy the M0130).
We found a workaround by having a USB hub on the m0125 instead of going over the native uart.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login