flight core v2

[jconk]

so far I have tried about 6 different configurations to get the FC v2 to talk with the voxl.
Just as a simple question
If I have the voxl connected to the computer via cable and the fc connected by wifi, logging in to ssh root@192.168.8.1
1.if I run voxl-vision-px4 --debug_udp_recv I get , connected tovoxl-mavlink-server but no messages from px4
2 if I go to qgc analyze tools there is a heartbeat (190 heartbeat 2.0Hz)
I am not able to connect to qgc unless I use the usb cable to FC v2
I have tried the FC v2 telem1 and telem2 and switched the rx/tx with no good result

Any direction that I should be looking would be helpful

[jconk]

changing to j11 and px4_uart_bus": 12, for J11 connection brought the voxl alive Looks like I can move on to the openvpn brain storm.

[modaltb]

Nice work locating that setting, agreed it's not obvious to locate all of this info... Although this is VOXL2 documentation, the graphic here might be helpful to see the plumbing:

https://docs.modalai.com/voxl2-external-flight-controller/#component-overview