Sentinel/Graupner gr-16/ Voxl2 IO
-
Hello, looking for some guidance on whether or not the assembly MCBL-00064-1 is available for utilizing the Graupner G-16 receiver. I see the part number associated, but there is no link to purchase. Also is the inclusion of the VOXL2 IO board required? Any advice is appreciated.
-
@McMason said in Sentinel/Graupner gr-16/ Voxl2 IO:
MCBL-00064-1
Yes, it is included in
MDK-M0065-1-01
MDK-M0065-1-02Which are the VOXL 2 I/O kits with R/C cables
-
Thank you @Chad-Sweet. Have you seen any issues with connecting a graupner receiver output to pin11(uart rx) on J19? Just looking for RC input without taking up more space with the IO board, and due to specifics we cant use certain radios. I cant find too much data on if the receiver has an inverted signal like the FrSky does.
-
This post is deleted!
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login