Microhard pDDL Carrier USB Dongle accesing ethernet
-
Hello,
We would like to use the Voxl 2 in our Drones. I two questions regarding the Standalone Microhard Carrier:
- Is it possible to access a second Ethernet port on the carrier? We have some payload that communicates over UDP. There is one module on the Ground and one in the air.
- Is it possible to get an SBUS signal into the ground carrier? We don't want to use a second communication method just or SBUS.
Thanks in advance!
Kind regards
Jan -
Hello,
We would like to use the Voxl 2 in our Drones. I two questions regarding the Standalone Microhard Carrier:
- Is it possible to access a second Ethernet port on the carrier? We have some payload that communicates over UDP. There is one module on the Ground and one in the air.
- Is it possible to get an SBUS signal into the ground carrier? We don't want to use a second communication method just or SBUS.
Thanks in advance!
Kind regards
JanHi @Jan-Hartmann ,
If you review our MH carrier block diagram here: https://docs.modalai.com/microhard-add-on-datasheet/#block-diagram
You'll notice we unfortunately do not expose the other Microhard Ethernet port. I'm not optimistic there is even a way to get it with blue-wires. Sorry about that.For S.BUS support, we offer a small standalone product noted here: https://docs.modalai.com/voxl2-io/
We think that is a great little gadget that expands your PWM and I/O options and is meant for Voxl2.Let us know if you have any other questions!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login