Doodle Labs + Low Latency on VTX

[Demarconius]

Hi Everybody.
I'm trying to get a better understanding of how the Video encoding latency gets down to 15ms with Doodle Labs integration? I recognize these are two separate statements that are in the same paragraph so it may not be possible.
Has there been any improvements to Doodle Labs Mini OEM getting a lower latency below 100ms? I'd love to test this out myself.

[Moderator]

@Demarconius Yes, we can achieve ~50ms glass to glass using our VRX and voxl-vtx software service on the UAS-side.

VRX Ground Unit Developer Guide

ModalAI technical documentation for VOXL and VOXL 2 Companion Computers for PX4 and ArduPilot Obstacle Avoidance and GPS-denied navigation, assembled in the USA

ModalAI Technical Docs (docs.modalai.com)

[Demarconius]

@Moderator

Thanks for the clarification on the ~50 ms glass-to-glass number.

Trying to get a better understanding the performance envelope:
1. Does the 50 ms include RF transport over Doodle, decode, and HDMI output latency, or is that measured only within the VOXL + VRX software stack?
2. Was this measured in point-to-point mode or mesh routing mode?
3. Can you expand on bitrate, resolution, and encoder settings were used (GOP structure, B-frames disabled, UDP vs RTSP)?
4. Is MAVLink or other traffic running on the same link during that measurement?
5. Do you have a latency breakdown per stage (encode / RF / decode / display)?

Appreciate any information you can provide. I just want to make sure I can test and validate this effectively.