Integrating Holybro GPS on Sentinel drone
-
Hello All,
I've procured a DroneCAN H-RTK F9P Helical to integrate on the Sentinel drone.
I see there are basic instructions here about which cable to use for attaching a GPS to the drone, but I am looking forward to a bit more detailed Quickstart to proceed with.
Any help, suggestions, or pointers will be helpful.
Awaiting responses.
-
Hello All,
I've procured a DroneCAN H-RTK F9P Helical to integrate on the Sentinel drone.
I see there are basic instructions here about which cable to use for attaching a GPS to the drone, but I am looking forward to a bit more detailed Quickstart to proceed with.
Any help, suggestions, or pointers will be helpful.
Awaiting responses.
@SMRazaRizvi At first glance, it looks like that GPS uses CAN to communicate. There is not a supported CAN interface on VOXL 2. You will need to use an Arduino or something in the middle to translate CAN protocol to something VOXL 2 can interface with
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login