ModalAI Forum

@tom Do you have instructions for setting up flight modes in QGC for the Spectrum DX6e?
What airfame should I use for indoor flying?
I choose the Px4 Vision DevKit Platform Quad-copter.

@RichieRich How do I update the parameter files? I have a VOXL M500 and want to fly it inside. Should I use QGC or some other program?

I'm not able to activate flight mode on QCG. The error message is saying: Avoidance System not ready.
The Not Ready error message shows GPS is disabled, Gyro 2 is disabled, and Accelerometer 2 is disabled.
Do I need these enabled for flight mode?
If so, how do I enable them?

I'm not able to activate flight mode on QCG. The error message is saying: Avoidance System not ready.
The Not Ready error message shows GPS is disabled, Gyro 2 is disabled, and Accelerometer 2 is disabled.
Do I need these enabled for flight mode?
If so, how do I enable them?

Got it. Thanks.

Great. I’ll join the Google meet link.

Great. Can we do tomorrow at 12 PM ET, 9 AM PT? If not, please suggest a call Tim tomorrow. I’m pretty much open tomorrow. Thank You!

Can we do a short video call now please?

I plugged in the JST microUSB connection into my computer with QGC opened. QGC does not see the m500. I tried to set up vehicle firmware but it is not QGC is not recognizing anything. I tried unplugging and plugging it in with QGC opened and tried rebooting QGC but neither worked.

@modaltb Do I need an Android devise to download ADB? I don't have an Android devise. Do I need ADB to connect the drone or program the drone?

I'm not good at this stuff yet but I will learn from you and share my learning with others. I'm excited to get this thing flying. I have spoken to Chad about my plans in building a solution for a large retail customer in Atlanta. I'm a sales guy hungry to learn this stuff and will be a good student of your direction. Forgive me if I ask novice questions.

Thanks for working with me. Is ADB: android debug bridge? I’m using the out of box mode. I guess it’s access point.

@modaltb said in Red blinking light when connecting WiFi:

m500 is on the same IP network as your windows machine

Can you help me set up m500 on the same IP network windows machine over a video call?

Hi Guys,
I'm trying to connect via WiFi. I can see VOXL on my WiFi networks and can connect to it. The connection symbol on my Windows machine turns from a signal symbol to a world symbol when I'm connected. Ground Control does not see the PX4 when it says connected. The battery is: Zeee 5200mAh 50C 11.1V 3S RC Lipo Battery.

I have the VOXL M500. I am trying to fly it over a windows machine. I have downloaded Q Ground Control. I plugged in the battery to the drone. The Pixhawk 4 antenna blinks red. I have not seen it blink green shown in the quick start video. I can see VOXL on my computer. It wont connect. Please advise on how to connect the drone to my computer and do a test flight.