@serge said in autostart voxl-streamer:

@Alex-Gardner said in autostart voxl-streamer:

systemctl enable voxl-stream

thank you

@Alex-Gardner said in autostart voxl-streamer:

systemctl enable voxl-stream

thank you

we tryed to calibrate the he stereo cam of fresh received original voxlcam following your web, and we get calibration error, please check below:

voxl:~$ voxl-calibrate-camera stereo -s 6x8 -l 0.0305
Sampling overlapping images now
Enter an empty line to take a sample or "stop" to finish sampling

Taking Frame

Taking Frame

Taking Frame
stop
Stopping sampling
Calibrating Left Camera
Matrix
[492.1770564681099, 0, 295.4825398094734;
0, 492.8901026252761, 209.272634625896;
0, 0, 1]
Distortion
[-0.1594579771759119;
0.04962863321553145;
-0.001253636483962171;
-0.001198103506208682;
0]
distortion_model: plumb_bob
Re-projection error reported by calibrateCamera: 0.397087
Calibration Succeded!
Calibrating Right Camera
Matrix
[494.8907451968516, 0, 316.5899881855318;
0, 495.6589926401959, 253.4642768466877;
0, 0, 1]
Distortion
[-0.1745222226485783;
0.07184982910704507;
-0.0007935469814187805;
0.002257594081306318;
0]
distortion_model: plumb_bob
Re-projection error reported by calibrateCamera: 0.416621
Calibration Succeded!
Calibrating Extrinsics
3 frames will be processed
R
[-0.9974198548962341, -0.03078682869103906, 0.06485217219125451;
0.03354128911161051, -0.9985619529928232, 0.04182114249862379;
0.06347137136935731, 0.04388846333955487, 0.9970181481809569]
T
[0.001165923908125856;
-0.01414810568973897;
-0.008488033152070548]
Re-projection error reported by stereoCalibrate: 79.097565
Extrinsics Calibration Failed
Max reprojection error: 0.5

Hello, we need to autostart voxl-streamer, can you tell us how to do it?

Kind regards.

Hello,

We work on the integration for the voxl board in our uav.

We need to be able to add ethernet interface to it.

Can you help us to find solution?

@sergio said in ARDUPILOT VOXL CAM ORIENTATION ISSUE ?:

@serge said in ARDUPILOT VOXL CAM ORIENTATION ISSUE ?:

@Chad-Sweet Hello,

Ok for test the upside down, can you share here the extrinsics to put it upside down?

As you can show on the photos on posts above, I set the extrinsics file to this values below to match the tracking camera positionning, and I achieve better positionning and qvio quality.

Please check my extrinsics below:
{
"name": "seeker_v1_voxlcam",
"extrinsics": [{
"parent": "imu0",
"child": "tracking",
"T_child_wrt_parent": [0.041, 0.014, 0.01],
"RPY_parent_to_child": [0, 0, 0]
}, {
"parent": "imu1",
"child": "tracking",
"T_child_wrt_parent": [-0.0074, 0.021, 0.01],
"RPY_parent_to_child": [0, 0, 0]
}, {
"parent": "body",
"child": "imu0",
"T_child_wrt_parent": [0.0496, -0.0152, 0.0161],
"RPY_parent_to_child": [0, 90, 90]
}, {
"parent": "body",
"child": "imu1",
"T_child_wrt_parent": [0.0465, 0.0332, -0.013],
"RPY_parent_to_child": [0, 90, 90]
}, {
"parent": "body",
"child": "stereo_l",
"T_child_wrt_parent": [0.055, -0.04, 0],
"RPY_parent_to_child": [0, 90, 90]
}, {
"parent": "body",
"child": "ground",
"T_child_wrt_parent": [0, 0, 0.045],
"RPY_parent_to_child": [0, 0, 0]
}, {
"parent": "imu1",
"child": "imu0",
"T_child_wrt_parent": [-0.0484, 0.037, 0.002],
"RPY_parent_to_child": [0, 0, 0]
}, {
"parent": "body",
"child": "tof",
"T_child_wrt_parent": [0.055, 0, 0],
"RPY_parent_to_child": [0, 90, -90]
}]
}

But the issue, is that I always get bad positionning.

please check the ardurover log via the link below:
https://1drv.ms/u/s!AssmjyIs_YcBqz7NvkZmM4Gv7LZt?e=mBVFhS

You can see that we achieve to make U chape trajectory, but at some point, qvio loses the yaw.......

Please check the log.

Please also tell me how to make qvio logs with voxlcam for you post analys what going on.

Also, please tel me what qvio quality number must be achieved when going forward and making turns?

here you have the best logs we achieved.
at the end qvio lose yaw....

I really would like to try the upside down voxlcam with tracking camera mounted as factory deliver it.

Please let me know how to achieve this, I think that extrinsics file is not the only conf file to tune for it, and all the items must be reversed?

It would be gracefull from your part to provide consistant support for it by giving the extrisincs and sharing it at all your customers here.

Kind regards.

Dear Chad, Please, can you tell me if tracking camera is factory calibrated? Do you advice to calibrate it to enhance the results?

Also Please send me the voxl cam intrinsics for upside down the voxlcam in rover app.

I really need your support to go forward please.

@Chad-Sweet Hello,

Ok for test the upside down, can you share here the extrinsics to put it upside down?

As you can show on the photos on posts above, I set the extrinsics file to this values below to match the tracking camera positionning, and I achieve better positionning and qvio quality.

Please check my extrinsics below:
{
"name": "seeker_v1_voxlcam",
"extrinsics": [{
"parent": "imu0",
"child": "tracking",
"T_child_wrt_parent": [0.041, 0.014, 0.01],
"RPY_parent_to_child": [0, 0, 0]
}, {
"parent": "imu1",
"child": "tracking",
"T_child_wrt_parent": [-0.0074, 0.021, 0.01],
"RPY_parent_to_child": [0, 0, 0]
}, {
"parent": "body",
"child": "imu0",
"T_child_wrt_parent": [0.0496, -0.0152, 0.0161],
"RPY_parent_to_child": [0, 90, 90]
}, {
"parent": "body",
"child": "imu1",
"T_child_wrt_parent": [0.0465, 0.0332, -0.013],
"RPY_parent_to_child": [0, 90, 90]
}, {
"parent": "body",
"child": "stereo_l",
"T_child_wrt_parent": [0.055, -0.04, 0],
"RPY_parent_to_child": [0, 90, 90]
}, {
"parent": "body",
"child": "ground",
"T_child_wrt_parent": [0, 0, 0.045],
"RPY_parent_to_child": [0, 0, 0]
}, {
"parent": "imu1",
"child": "imu0",
"T_child_wrt_parent": [-0.0484, 0.037, 0.002],
"RPY_parent_to_child": [0, 0, 0]
}, {
"parent": "body",
"child": "tof",
"T_child_wrt_parent": [0.055, 0, 0],
"RPY_parent_to_child": [0, 90, -90]
}]
}

But the issue, is that I always get bad positionning.

please check the ardurover log via the link below:
https://1drv.ms/u/s!AssmjyIs_YcBqz7NvkZmM4Gv7LZt?e=mBVFhS

You can see that we achieve to make U chape trajectory, but at some point, qvio loses the yaw.......

Please check the log.

Please also tell me how to make qvio logs with voxlcam for you post analys what going on.

Also, please tel me what qvio quality number must be achieved when going forward and making turns?

here you have the best logs we achieved.
at the end qvio lose yaw....

I really would like to try the upside down voxlcam with tracking camera mounted as factory deliver it.

Please let me know how to achieve this, I think that extrinsics file is not the only conf file to tune for it, and all the items must be reversed?

It would be gracefull from your part to provide consistant support for it by giving the extrisincs and sharing it at all your customers here.

Kind regards.

@Chad-Sweet Hello,

How to setup extrinsics for upside down ?

Can you help?

After many test we get singular issue.

All seem to be related to bad reference between autopilot and voxlcam.

We initialising, we we go straight to the north, there is no errors, as soon as we make turn EK3 failsafe.

Maybe we need proffessionnal support from you, can you please contact us ?

Kind regards.

Hello, So I corrected this point now I achive to make ride indoor with 0,1 mean quality and even I go to 0,6 quality spikes, so now we can tell that this extrinsics are correct for qvio.

Now the issue is that there is clearly issus beetwin voxl coordinates and px4.

I always have ekf faisafe as soon as I go forward.

So As I use normal px4 ap, there is extrinsics to enter in extrinsics conf fil or px4?

Can you help me please?