How do I connect to Q Ground Control when the M500 is in Station Wifi Mode? I have the primary ground control IP address set to my laptop, which connected to the network the M500 is connected to.

What is the best way to stream the tracking camera? I need to stream it through an rtsp python script. I tried changing voxl-streamer.conf and voxl-mavcam-manager.conf to stream the camera, those didn't work. I ran the command voxl-streamer -i tracking, and it connected to my script, it connected to the camera, then disconnected (this script worked fine with the hires camera).

@Alex-Kushleyev Thanks for the reply. We tried this on our voxl1, but it didn't work. We get an error saying "Invalid option -- "d"". Is there a way to get this working on voxl1 on the m500?

I want to take pictures from the stereo cameras. Is there a way to do this through voxl-send-command or any other terminal command?

@tom I thought it was, it appears it isn't. How do I connect it to the internet?

I was trying to build the python mavsdk voxl docker image for my Modal M500 on a voxl one with Voxl SDK 1.2.0 installed https://gitlab.com/voxl-public/voxl-docker-images/voxl-docker-mavsdk-python However when I run build.sh, I get the following error:

./build-image.sh
Image: voxl-mavsdk-python:v1.1
Waiting for device...
Checking for docker support...
-> Docker support not detected, running docker support on target...
/bin/sh: voxl-configure-docker-support.sh: not found
Building image: voxl-mavsdk-python:v1.1
Dockerfile: 1 file pushed. 0.3 MB/s (811 bytes in 0.002s)
takeoff_and_land2.py: 1 file pushed. 0.4 MB/s (941 bytes in 0.002s)
offboard_position_ned2.py: 1 file pushed. 1.8 MB/s (2227 bytes in 0.001s)
start-mavsdk-server.sh: 1 file pushed. 0.1 MB/s (109 bytes in 0.001s)
Sending build context to Docker daemon 8.192 kB
Step 1 : FROM arm64v8/ubuntu:bionic
Pulling repository docker.io/arm64v8/ubuntu
Error while pulling image: Get https://index.docker.io/v1/repositories/arm64v8/ubuntu/images: dial tcp: lookup index.docker.io on 8.8.8.8:53: dial udp 8.8.8.8:53: connect: network is unreachable

The drone is connected to the computer via USB and I have a connection via adb shell. Anyone know how to fix this?

@Eric-Katzfey I am using SoftAP mode in Wifi.

I recently updated the Voxl SDK on my Modal M500 from 0.9.5 to 1.2.0, and now the aircraft won't connect to Q Ground Control. When I open Q Ground Control, it says disconnected. The aircraft still connects to my laptop via wifi and I can SSH into the aircraft from a terminal.

@Eric-Katzfey Do you have a list of voxl-send-command commands, or is it listed in the documentation somewhere?

I was able to get the SDK upgraded to Voxl 1.2.0. However now it won't communicate with Q Ground Control. When I open it, it shows that it is disconnected despite there being a wifi connection between between the laptop and the M500. It connects to the laptop fine and I can SSH into the aircraft. Is there a setting somewhere on the aircraft that I have to change for it to connect with QGC again?